Perovskite solar cells are widely seen as the next big leap in photovoltaics. These devices use a special class of crystalline materials that convert sunlight into electricity with exceptional efficiency. However, their sensitivity to temperature swings has slowed their path to our rooftops. Researchers at the Technical University of Munich (TUM) and the Cluster of Excellence e-conversion have now identified why these promising materials lose their performance – and how they can be stabilized.

Perovskite solar cells are among the most promising technologies for making solar power cheaper and more efficient. Working with partners from the Karlsruhe Institute of Technology (KIT), DESY (Deutsches Elektronen-Synchroton), and the KTH Royal Institute of Technology in Stockholm, the team uncovered the microscopic mechanisms behind the deterioration of the material through temperature swings and developed a strategy to prevent it. Their approach focuses on stabilizing the fragile crystal structure with specially designed molecular “anchors”.

Beyond the Lab: Survival in the Real World

To achieve the climate goals of tomorrow, solar cells must endure for decades. While perovskites have reached record-breaking efficiencies in converting solar light into electricity, they face a brutal enemy in nature: extreme temperature changes. Experts refer to this as thermal cycling. In a single day, a solar panel can fluctuate from freezing nights to scorching heat. These real-world conditions, repeated heating and cooling, can trigger an early degradation phase in which perovskite solar cells may lose their relative performance.

"If we want these cells on every roof, we have to ensure they don't just perform in the lab, but endure the stress of the seasons," says Prof. Peter Müller-Buschbaum, Chair of Functional Materials at TUM School of Natural Sciences and member of the e-conversion Cluster of Excellence. His research team works on this challenge and has identified the microscopic causes of this instability. They developed new design strategies to make the top layer of tandem solar cells more robust, enabling them to withstand real-world conditions. Tandem solar cells are made up of stacked solar cells (two in minimum) and therefore make better use of sunlight.

The "Burn-In" Phase Decoded

In a study published in Nature Communications, lead author Dr. Kun Sun from the TUM Chair of Functional Materials and the team investigated so-called High-Efficiency Wide-Bandgap cells – the upper cells in a tandem solar cell. Using high-resolution X-ray measurements at DESY, the team watched the material "breathe" in real-time during rapid temperature changes; the lattice periodically expanded and contracted in response to rapid temperature fluctuations.

The discovery was striking: degradation happens in a massive initial "burn-in" phase, where cells can lose up to 60% of their relative performance. "We revealed that a microscopic tug-of-war triggers this loss," explains Dr. Kun Sun. “Tensions arise inside the material and its structure changes – this costs power.” This finding gives engineers a clear target: if we can eliminate the burn-in, we can unlock long-term stability.

Designing the "Perfect Anchor"

How do we stop the material from falling apart? In a second paper published in ACS Energy Letters, the researchers reported how to stabilize the sensitive crystal material. They used special organic molecules that act as spacers, holding the structure together – like a molecular scaffold.

By comparing different spacers, the researchers found a winner: while common spacers led to structural breakdown, the bulkier organic molecule PDMA acted as a superior anchor. The result is a significantly more robust solar cell that remains stable even under the mechanical stress of rapid heating and cooling.

"The future of photovoltaics is tandem," says Prof. Müller-Buschbaum. "By understanding these microscopic mechanics, we are paving the way for a new generation of solar modules that are both highly efficient and durable enough for decades of outdoor use."

Publications

• Kun Sun, Renjun Guo et al.: “Insights into the operational stability of wide-bandgap perovskite and tandem solar cells under rapid thermal cycling”, published in: Nature Communications, 14 January 2026, DOI: https://doi.org/10.1038/s41467-025-68219-w
• Kun Sun, et al.: “Halide Segregation in Wide-Bandgap Quasi-2D Perovskites under Rapid Thermal Cycling”, published in: ACS Energy Lett 2026, 11, 3, 2952–2958, 24 February 2026, DOI: https://doi.org/10.1021/acsenergylett.6c00094

Contact about this article

Dr. Kun Sun
Technical University of Munich (TUM)
TUM School of Natural Sciences
Cluster of Excellence e-conversion
kun.sun@ph.tum.de

Technical University of Munich
Corporate Communications Center

Dr. Caroline Zörlein
presse@tum.de
Teamwebsite

Original article: https://www.tum.de/en/news-and-events/all-news/press-releases/details/making-perovskite-solar-cells-weather-resistant